RFID技术在化工危险品仓库管理中的应用

本文针对危险化学品的危险特性,指出了建立现代化的安全管理制度的重要性,而RFID是实现企业和社会信息化的重要技术之一,它能在显著提升企业竞争力和业务绩效以及降低总体应用成本。     

化工新工艺与可持续发展

主要阐述化工新工艺必须以人类的可持续发展为前提，强调资源的综合合理利用，注重环境保护等，并通过实例说明化工新工艺对可持续发展的贡献。     

开展项目教学,提高教与学质量

项目教学合理的选择了知识内容和教学方法,保证了学生获得相对完整的专业知识和专业能力,所以项目教学既提高了教师的教学素质,同时也提高了学生各方面的能力。     

溶胶-凝胶法制备SiO2-P2O5-TiO2粉体

采用溶胶-凝胶工艺制备出平均尺寸为0.109μm的SiO2-P2O5-TiO2细小均匀的粉体。通过XRD、SEM、热重分析发现,粉体中存在着包裹在颗粒周围的无定形二氧化硅膜,能有效的抑制水解时磷和钛的副反应发生,改善了粉体的化学稳定性,并且该粉体具有良好的吸湿性,适合于制备电解质薄膜。     

超微粒MnO_2的合成

以MnCl_2和NaOH为原料,采用胶溶法,制备了超微粒MnO_2制得的MnO_2超微粒为非晶态,直径6.0～10.0 nm,呈球状,在有机溶剂中具有良好的分散性和透明性,考察了影响氧化锰溶胶调制的因素,获得了最佳制胶条件,研究了表面活性剂用量与Mn迁移率的关系;通过X-光粉末衍射、红外光谱、热重及差热分析,研究了产品的结构性能。     

机载GPS天线的研制

本文论述了作者最近研制的机载ＧＰＳ天线．使天线的波束宽度很宽，满足飞机在上３０°范围内翻滚要求，而能很好的地接收ＧＰＳ导航卫星的信号．实验证明使天线满足设计要求，天线性能是优良的．     

立窑窑面空气过剩系数与节能浅析

本文根据一些立窑水泥厂的热工测定数据,推导出了化学不完全燃烧热损失Q_(hb),废气带走热损失Q_f与窑面空气过剩系数之间的关系,阐述了产生化学不完全燃烧热损失的原因,并就如何降低热损失,节约能源提出了设想。     

激光诱导化学气相合成纳米微粉的物理化学模型

针对激光低压化学气相合成纳米微粉材料的过程建立了物理化学统一模型,其中包括气体分子动力学、化学反应热力学和流体动力学三部分.分别介绍了模型的基本假设、基本公式及主要结论.描述了反应物分子的热运动状态,提出了激光强度阈值的预测方法,给出了生成物颗粒的成核速率、生长速率和最终粒径.模型对进一步揭示纳米微粉生成过程的物理化学机制,寻找宏观工艺参量对微观合成过程及所制备纳米微粉性质的影响规律有实际意义.     

Elaboration and Properties of Nanocomposite Structures Based on Crown Modified Platinum Nanoparticles

1 Results This paper presents the development of platinum nanocomposites structures based on organically modified c.a.2 nm core platinum nanoparticles.The chemical modification of the 4-mercaptoaniline functionalized particles by various in coming molecules is evidenced and precisely quantified.The particles can be dissolved like molecules in various solvents depending on the features of the new crown and X-rays shows that the interparticle distance is affected by the crown modification.These platinum n...     

Joint Strength with Soldering of Al2O3 Ceramics After Ni-P Chemical Plating

Ni-P alloy was chemically plated on Al2O3 ceramics to produce uniform alloy coatings at temperatures below 70~C. Cu metal was electroplated onto the Ni-P coating to facilitate the soldering and shorten the chemical plating time. Then, the electroplated ceramic specimens were soldered with 60 wt.% Sn-40 wt.% Pb solder in active colophony. The highest shear strength was acquired after the heat treatment at 170℃ for 15 min. The joint fractures mostly propagated along the interface between the ceramics and the Ni-P coating, with some fracture in both the ceramics and the Ni-P coating near the interface and some along the interface between the Cu and Ni-P coatings. The results show that ceramic surface roughness and the chemical plating parameters influence the coating quality, and that suitable heat treatment before the soldering also improves the adhesion between the ceramics and Ni-P coatings, thus strengthening the joints.